How to : Halogen Headlight Conversions for Hotrods How to : Halogen Headlight Conversions for Hotrods
Posted by: Desertrodder

Video duration: 841 seconds

Do you have the original headlights and can't see where you are driving at night .
Well convert them to Halogen globes without costing the earth. This process only took 2 hours to complete at home.all for under $100, and that's with the chrome plating too.
\"How to save a badly damaged mudguard\" "How to save a badly damaged mudguard"
Posted by: Desertrodder

Video duration: 163 seconds

Some panels are just damn hard to find , so when you find a badly damaged one you do what you can do to fix it. This is a 1936 Ford front mudguard and I share how I used the most basic method to straighten it
\"How to Modify Early Ford Wire Wheels.\" "How to Modify Early Ford Wire Wheels."
Posted by: Desertrodder

Video duration: 883 seconds

"Have you ever wanted a set of Ford wire wheels for your Hotrod?"
Here I show you how to look for the various sizes so you will get a matching set and how they are modified.
How to: Engine mounts for Streetrods. How to: Engine mounts for Streetrods.
Posted by: Desertrodder

Video duration: 187 seconds

Have you ever thought how can you make your Streetrods engine mounts?
Here I show you how I did with the original cross member from a 1936 Ford.
Probably the safest engine mounts today.
\"Fitting a better front end in a Streetrod\" "Fitting a better front end in a Streetrod"
Posted by: Desertrodder

Video duration: 459 seconds

Have ever bought a streetrod and hated the ride you get? Change it then!
That's what I did all for under $ 250 and here I show you how.
So with this video I show you how I went about it with a factory donor front end.
And it worked a treat too. Sure it was all my labour but you can do it too from your home.
Harley Davidson Fuel Tank Repairs, \"How to stop it leaking\" Harley Davidson Fuel Tank Repairs, "How to stop it leaking"
Posted by: Desertrodder

Video duration: 345 seconds

This tank did what we don't want to happen, especially on your ride. "It leaked fuel". Here I show you how I solved this problem on this Harley Davidson tank.
\"Stripping Paint\" ....Fast from any Car Doorjams. "Stripping Paint" ....Fast from any Car Doorjams.
Posted by: Desertrodder

Video duration: 672 seconds

Removing the paint from car door jams has to be one of the worst jobs to tackle on any project. Here I compare a couple of discs to show you which is the better choice for you, making your job a heck of a lot easier.
\"The Hottest Wedding Day\" "The Hottest Wedding Day"
Posted by: Desertrodder

Video duration: 998 seconds

Try 47c degrees, with cars boiling, bride 45 min late, people fainting and all with a strong northerly wind. All outside on the top of a mountain.
Door Skin Repairs from Rust: \"The Correct Way\" Door Skin Repairs from Rust: "The Correct Way"
Posted by: Desertrodder

Video duration: 885 seconds

Remove rusty sections from panels and doors, rather than just bog over the rust we show you the best way to fix this rust problem for penny's.
\"The smallest door for any Hot Rod\" "The smallest door for any Hot Rod"
Posted by: Desertrodder

Video duration: 250 seconds

Have you ever thought about topping your master cylinder up when its mounted under the floor? Here's a neat trick to help you do this.
How to: \"Repairs to a Hot rod cowl\" How to: "Repairs to a Hot rod cowl"
Posted by: Desertrodder

Video duration: 209 seconds

Hot rods don't come cheaply these days or can they, just watch how I saved a 1935 Ford cowl on the cheap. Its now ready for a Tudor Street Rod.
Widening rear guards for 1935 -1940 Hotrods Widening rear guards for 1935 -1940 Hotrods
Posted by: Desertrodder

Video duration: 578 seconds

An easy and cheaper method to widen the rear guards on any hot rod or street rod. Without the use of English wheel machines. See how to perform the hammer welding technique.
\"How To Make Yourself a Bench Seat\" "How To Make Yourself a Bench Seat"
Posted by: Desertrodder

Video duration: 283 seconds

Sometimes bucket seats just don't cut it in Hot Rods, especially nostalgia rides!
"Make yourself a bench seat"
\"Hot Rod Bonnets\" removing the hinge pin the easy way. "Hot Rod Bonnets" removing the hinge pin the easy way.
Posted by: Desertrodder

Video duration: 284 seconds

How to remove a bonnet hinge pin. Make it easier on yourself and try this method, it sure beats the hell out of blood, sweat and tears!
Robbie Williams by Jake Robbie Williams by Jake
Posted by: Desertrodder

Video duration: 244 seconds

Song by Robbie Williams performed by Jake
Remove Rust Hints and Tips from Metal and Panels: Video 3 Remove Rust Hints and Tips from Metal and Panels: Video 3
Posted by: Desertrodder

Video duration: 207 seconds

Tips on the Removal of rust from metal and panels
Remove Rust from Metal and Panels the Easy Way: Video 1 Remove Rust from Metal and Panels the Easy Way: Video 1
Posted by: Desertrodder

Video duration: 336 seconds

"The easy and safe way to remove rust at home". I am amazed at how many people have not heard of this method before. Some old school tips are more useful today, it saved them money and it will save you time and money too.
1934 Ford Coupe sounds great with a Flathead 1934 Ford Coupe sounds great with a Flathead
Posted by: Desertrodder

Video duration: 49 seconds

Fitted with a 3/4 Race Cam
Hot Rods which cost less Hot Rods which cost less
Posted by: Desertrodder

Video duration: 125 seconds

"They don't all have to shine"
Hot Rod or Rat Rod? Hear the Ardun equipped flathead Hot Rod or Rat Rod? Hear the Ardun equipped flathead
Posted by: Desertrodder

Video duration: 264 seconds

This sidevalve sounds great with straight out pipes and blower