\ '69 Camaro Restoration Update
Posted by: CoolCarsHotGuitars

Video duration: 201 seconds

A quick update on the Camaro project
427 Cobra Engine Dyno Test 427 Cobra Engine Dyno Test
Posted by: CoolCarsHotGuitars

Video duration: 164 seconds

Finally got my Cobra engine on the dyno. It is a 351W 408 stroker bored "0.030, solid tappet cam, roller lifters, and 2,100 CFM air flow. Preliminary results are over 500HP and 400 ft lbs torque. I will add final numbers when I fix a small oil leak.
Super Cool Vacuum Lines Super Cool Vacuum Lines
Posted by: CoolCarsHotGuitars

Video duration: 279 seconds

I wanted something different for the vacuum lines on my Cobra engine and I found it a hosecandy.com. Great products and they look awesome! This video is about assembly and installation of their product.
Cobra Engine Build Part 2 Finishing Cobra Engine Build Part 2 Finishing
Posted by: CoolCarsHotGuitars

Video duration: 887 seconds

This video shows the final assembly of the 351W for my 427 Cobra. It is a 408 stroker motor with a balanced rolling assembly.
Torque & Angle Explained with a Stress / Strian diagram Torque & Angle Explained with a Stress / Strian diagram
Posted by: CoolCarsHotGuitars

Video duration: 891 seconds

This video will help you understand the difference between torque and angle. Angle is a calculated measurement based on many factors. It is important to understand both in order to avoid stripping a thread or using a spent fastener.
Cobra Engine Build Part 1 Cobra Engine Build Part 1
Posted by: CoolCarsHotGuitars

Video duration: 640 seconds

This will be the first in a series on the engine build for my Cobra. This is a 351W bored 0.030" with a 408 stroker crank. The intake was converted to fuel injection and featured in a previous video. I will list components as much as I can.
Detailing with Powder Coat Detailing with Powder Coat
Posted by: CoolCarsHotGuitars

Video duration: 494 seconds

This video shows how to use powder coat to add detail to engine parts. It is a real fun process because it is so versitile and the colors are awesome. It's not as dynamic as anodizing but it still produces and excellent finish.
Paint Matching & Aluminum Polishing Paint Matching & Aluminum Polishing
Posted by: CoolCarsHotGuitars

Video duration: 556 seconds

This is a short video about paint matching panel repair, and polishing aluminum. For this 1979 Fiat I needed to paint the hood since the paint job on it (the third paint job) faded and got extremly chalky. I use DuPont ChromaSeal value shade 7 to prep the hood for the metallic bronze that orginally came on the car. I also polish out scratches on the aluminum ornaments for the wheels.
Port Match and Polishing Cylinder Heads Port Match and Polishing Cylinder Heads
Posted by: CoolCarsHotGuitars

Video duration: 439 seconds

This is a continuation of the custom intake manifold video. This video is about port matching and polishing both the intake manifold and aluminum cylinder heads for a Ford 351W.
Shelby the Pug vs The Laser Shelby the Pug vs The Laser
Posted by: CoolCarsHotGuitars

Video duration: 69 seconds

Of course my dog is named Shelby!
Modifying a Stock Intake Manifold - Adding EFI Modifying a Stock Intake Manifold - Adding EFI
Posted by: CoolCarsHotGuitars

Video duration: 436 seconds

This is the intake manifold for my Cobra engine. It starts as a stock Edelbrock dual plane, dual quad intake. I mill and weld in the Accel bungs for the high performance injectors. It gets topped off with 2 Accel 1050 CFM throttle bodies mounted to a custom billet spacer.
Paint Scratches and Small Dent Repairs Paint Scratches and Small Dent Repairs
Posted by: CoolCarsHotGuitars

Video duration: 464 seconds

If you get a paint scratch or ding in a parking lot or from a small fender bender, this video can help you understand the steps to repair it yourself.
427 Cobra Frame Rail Sonata 427 Cobra Frame Rail Sonata
Posted by: CoolCarsHotGuitars

Video duration: 216 seconds

Yet another disappointing find on the Street Beasts weld quality. I can't believe they let this out of the factory like this. Check every weld.
Installing Lamborghini Door Hinges Installing Lamborghini Door Hinges
Posted by: CoolCarsHotGuitars

Video duration: 289 seconds

There are many direct bolt-in Lamborghini door hinges. This set is a universal kit that requires quite a bit of cutting, welding, and fitting. Once installed they worked pretty smooth.
StreetBeasts 427 Cobra Finished Motor Mount StreetBeasts 427 Cobra Finished Motor Mount
Posted by: CoolCarsHotGuitars

Video duration: 107 seconds

This is a condensed version of building the motor mount from start to finish. It took 5 hours to do one side. Totally worth it and way better than what StreetBeasts designed.
StreetBeasts 427 Cobra Motor Mounts StreetBeasts 427 Cobra Motor Mounts
Posted by: CoolCarsHotGuitars

Video duration: 292 seconds

This video is about making custom motor mounts instead of the ones supplied with the kit. I am going for strength and power transfer. The mounts supplied by StreetBeast were a bit chinsy for the HP I want to put in this cobra.
1 Opening In The Flesh (Buffalo) 1 Opening In The Flesh (Buffalo)
Posted by: CoolCarsHotGuitars

Video duration: 643 seconds

This is from The Wall Concert in Buffalo 10/8. By far the most moving and inspiring performance I have ever seen! Roger Waters performed flawlessly. Only the addition of Gilmour and Mason would have made it better.
9 Outside The Wall Ending (Buffalo) 9 Outside The Wall Ending (Buffalo)
Posted by: CoolCarsHotGuitars

Video duration: 114 seconds

This is from The Wall Concert in Buffalo 10/8. By far the most moving and inspiring performance I have ever seen! Roger Waters performed flawlessly. Only the addition of Gilmour and Mason would have made it better.
Mercedes Tear in Metal Door Repair Mercedes Tear in Metal Door Repair
Posted by: CoolCarsHotGuitars

Video duration: 583 seconds

This is a repair on a 2004 E Class Mercedes. There is a tear in the metal from a trailer hitch. This video shows the repair from start to finish. I had to fit it all in so I hit the highlights. Let me know if you have any questions....Thanks for watching.
Equinox 3.4L Blown Head Gasket Equinox 3.4L Blown Head Gasket
Posted by: CoolCarsHotGuitars

Video duration: 336 seconds

Diagnose and change your own head gasket and save a couple grand $$$. I did the whole job for about $175 but you can do it for $75 without changing the thermostat and water pump.
Tireology 101 part 2 Tireology 101 part 2
Posted by: CoolCarsHotGuitars

Video duration: 599 seconds

This is part 2 of the video's about tires. In this video I explain how to read a sidewall and what to look for when you buy tires.
Tireology 101 Part 1 Tireology 101 Part 1
Posted by: CoolCarsHotGuitars

Video duration: 580 seconds

This video is about tires...I know...how exciting. Acually, tires are more complex than you think. There are many defects you can identify when buying tires as long as you know what to look for. Part 1 video is about tire construction.